No-clean, halide free and colophony free gel flux
-10ml Dispenser Syringe
-Perfect for BGA Reballing
Interflux® IF 8300 is a no-clean, halide free and colophony free gel flux with minimal residues after soldering.
The gel flux is available in different viscosities for different applications. It can be applied by printing, dispensing, dipping or by brush.
IF 8300 is typically used for rework and repair applications. Other fields of use can be reflow, hand and robot soldering applications where a wide process window in combination with low residue formation after soldering are required.
The gel flux is compatible with both lead-free and SnPb alloys and enables good wetting on virtually all surface finishes.
The residues are minimal and transparent and do not require cleaning.
IF 8300 is absolutely halide free providing optimal reliability after soldering.
Physikalische und chemische Eigenschaften
- Consistency: viscous, tacky
- Colour: yellow
- Odour: sweet, mild
- Halide content: none
- pH (5% aq.sol): 3
- IPC/ EN: RE L0
- Solubility in water: insoluble
- Auto-ignition point: > 370 °C
- Flash point: 158 °C
- Specific gravity: 1,032 g/ml
- Viscosity at 20 °C: ± 210.000 cPs
Hazard statements:
H315 : Causes skin irritation.
H317 : May cause an allergic skin reaction.
H319 : Causes severe eye irritation.
P302+P352 : IF ON SKIN: Wash with plenty of water/....
P280 : Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue to rinse.
