AMTECH NC-559-ASM-TF Tacky flux - 10ml
TOP
AMTECH NC-559-ASM-TF Tacky flux - 10ml Dispenser Syringe
Product Highlights:
Recommended Profile Powder Distribution ROL0/REL0 materials do not require cleaning for most SMT assemblies. For applications requiring cleaning consider using commercial residue removers
Storage:
Tacky flux should be stored at room temperature (20-25 °C). Properly stored tacky flux has up to 24 month shelf life. Unlike solder paste, flux does not require refrigeration. Solder paste should be stored between 3-8 °C (37-46 °F) to obtain the maximum refrigerated shelf life of 12 months. Unopened solder paste stored at room temperature, 25 °C (77 °F) will have a one month shelf life. Allow 4-8 hours for solder paste to reach an operating temperature of 20-25 °C ( 68-77°F). Syringes and cartridges should be stored vertically in the refrigerator with the dispensing tip down.
NEVER FREEZE ANY SOLDERING MATERIAL.
Recommended Profile:
This profile is designed to serve as a starting point for process optimization. To achieve better results with voiding or to reduce tombstoning, consider using a longer soaking zone, for 60-90 seconds, with a rapid pre-heat stage. If there is evidence of solder de-wetting, consider lowering the peak reflow temperature, or reduce the time above liquidus to <60-90 seconds.
Hazard statement(s):
H302 Harmful if swallowed
H317 May cause an allergic skin reaction
H320 Causes eye irritation
H335 May cause respiratory irritation
Precautionary statement(s):
P102 Keep out of reach of children
P233 Keep container tightly closed
P264 Wash hands thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P280 Wear protective gloves/protective clothing/eye protection/face protection
P302 P352 IF ON SKIN: Wash with plenty of soap and water
P305 P351 IF IN EYES: Rinse continuously with water for several minutes
P404 Store in a closed container
P501 Dispose of contents/containers in accordance with Federal, State/Provincial, and/or local regulations
Product Highlights:
- ROL0 flux classification
- Exceptional print definition at high printing speeds up to 100mm/sec
- Long stencil life
- Wide process window
- Clear residue
- Low voiding
- Compatible with enclosed print heads
- Compatible with high temperature alloys (221-300 °C)
- Excellent wetting compatibility on most board finishes
- Print and dispense grade solder paste available
Recommended Profile Powder Distribution ROL0/REL0 materials do not require cleaning for most SMT assemblies. For applications requiring cleaning consider using commercial residue removers
Storage:
Tacky flux should be stored at room temperature (20-25 °C). Properly stored tacky flux has up to 24 month shelf life. Unlike solder paste, flux does not require refrigeration. Solder paste should be stored between 3-8 °C (37-46 °F) to obtain the maximum refrigerated shelf life of 12 months. Unopened solder paste stored at room temperature, 25 °C (77 °F) will have a one month shelf life. Allow 4-8 hours for solder paste to reach an operating temperature of 20-25 °C ( 68-77°F). Syringes and cartridges should be stored vertically in the refrigerator with the dispensing tip down.
NEVER FREEZE ANY SOLDERING MATERIAL.
Recommended Profile:
This profile is designed to serve as a starting point for process optimization. To achieve better results with voiding or to reduce tombstoning, consider using a longer soaking zone, for 60-90 seconds, with a rapid pre-heat stage. If there is evidence of solder de-wetting, consider lowering the peak reflow temperature, or reduce the time above liquidus to <60-90 seconds.
Hazard statement(s):
H302 Harmful if swallowed
H317 May cause an allergic skin reaction
H320 Causes eye irritation
H335 May cause respiratory irritation
Precautionary statement(s):
P102 Keep out of reach of children
P233 Keep container tightly closed
P264 Wash hands thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P280 Wear protective gloves/protective clothing/eye protection/face protection
P302 P352 IF ON SKIN: Wash with plenty of soap and water
P305 P351 IF IN EYES: Rinse continuously with water for several minutes
P404 Store in a closed container
P501 Dispose of contents/containers in accordance with Federal, State/Provincial, and/or local regulations
